Philips TAA5205 - Use Your Earpieces; Connecting to Bluetooth Device

Tip
Note
 The earpieces cannot connect to more than 1
device at the same time. If you have two paired
Bluetooth devices, only turn on the Bluetooth
function of the device that you want to connect.
 If you turn on the Bluetooth function of your
Bluetooth device after turning on the earpieces,
you have to go to the Bluetooth menu of the
device and connect the earpieces to the device
manully.
 If the earpieces fails to connect to any
Bluetooth device within 5 minutes, it will turn o
automatically to save the battery life.
 In some Bluetooth devices, connection may not
be automatic. In this case, you have to go to the
Bluetooth menu of your device and connect the
earpieces to the Bluetooth device manually.
The blue LED ashes.
The earpieces will search the
last connected Bluetooth device
and reconnect to it automatical-
ly. If the last connected device is
not available, the earpieces will
enter pairing mode.
4 Use your
earpieces
Turn on the Bluetooth function of
your Bluetooth device.
Open the top cover from charging
box.
Connect the earpieces to
your Bluetooth device