10
» You can use the wall mount template
provided for helping the drilling holes
position on the wall
» Secure the dowels and screws in the
holes.
2 Remove the screws (x4) from the main
unit.
» Attach the wall brackets (x2) to the
main unit with the screws removed
from the main unit.
3 Hang the Soundbar on the fastening
screws.
Wall mount
Note
•
Improper wall mounting may result in accident, injury or
damage. If you have any query, contact Consumer Care
in your country.
• Before wall mounting, make sure the wall can support
the weight of your Soundbar.
• Before wall mount, you need not remove the rubber
feet at the bottom of the Soundbar, otherwise the
UXEEHUIHHWFDQQRWEHÀ[HGEDFN
• Depending on the type of wall mounting your
Soundbar, make sure that you use screws of a suitable
length and diameter.
• Please check whether the USB port on the back of the
Soundbar is connected to a USB device. If it is found
that the connected USB device affects the wall-mount,
you need to use another USB device of the appropriate
size.
Screw length/diameter
Suggested wall mounting height
<RXDUHUHFRPPHQGHGWRLQVWDOOWKH79ÀUVW
before wall mounting the soundbar. With a
TV preinstalled, wall mount the soundbar
50mm/2.0’’ in distance from the bottom of the
TV.
1 Drill 2 parallel holes (Ø 3-8mm each
according to wall type) on the wall.
» The distance between the holes are:
• 856mm / 33.7”
(TAB8405 / TAB8505)
• 1017mm / 40” (TAB8805)
• 1076mm / 42” (TAB8905)
> 25mm
4mm
2
1
1076 mm / 42"
~50mm/2.0"
3
3.5-4mm/0.14”-0.16”
4mm/
0.16”
>25mm/0.98”
To Next Page
Loading...
