Philips TAH5209 - Pair with Another Bluetooth Device

Turn on the Bluetooth function of
your Bluetooth device.
Pair the headphones with your
Bluetooth device, refer to the user
manual of your Bluetooth device.
3
4
Pair the headphones with
another Bluetooth device
 The headphones store 5 devices in the memory.
If you try to pair more than 5 devices, the earliest
paired device is replaced by the new one.
Note
Philips TAH5209
7 EN
The following example shows you how to
pair the headphones with your Bluetooth
device.
Turn on the Bluetooth function of
your Bluetooth device, select
Philips TAH5209.
Enter the headphones' password
“0000” (4 zeros) if prompted. For
those devices featuring Bluetooth 3.0
or higher, there is no need to enter a
password.
1
2
05"
 After powering on, if the headphones can not

please put them into pairing mode (press the
power button for 5 seconds again after

Note
If you want to pair another Bluetooth

headphones, then press the power button
for 5 seconds and discover the second
device as per normal pairing.