EasyManua.ls Logo

Philips TAN4207 - User Manual

Philips TAN4207
14 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
User manual
Register your product and get support at
www.philips.com/support
Headphones
4000 Series
TAN4207

Questions and Answers

  • E
    Elizabeth WilliamsAug 27, 2025
    Why is auto-lock not working on my Philips Door locks?
    • J
      Jermaine MoodyAug 27, 2025
      If the Auto-Lock feature isn't working on your Philips Door locks, and the battery indicator is flashing continuously, replace the batteries with 4 new AA alkaline batteries. Also, ensure that you have activated the Auto-Lock function.
  • J
    James ReyesAug 27, 2025
    Why am I receiving low battery alerts on my Philips Door locks?
    • A
      Austin MossAug 27, 2025
      If you are receiving low battery alerts on your Philips Door locks, remove the current batteries and insert 4 new AA alkaline batteries.
  • C
    carol73Aug 28, 2025
    What to do if Latch Bolt makes sounds but does not work on Philips Door locks?
    • A
      Alison SanchezAug 28, 2025
      If, after installation, the Latch Bolt on your Philips Door locks makes sounds but does not work, ensure you have followed the installation instructions, re-install and reset the lock, making sure the Latch Bolt is fully retracted before installing the Exterior and Interior Assembly, not inserting the key during installation, correctly inserting the cable connector of the Exterior Assembly to the socket on the Interior Assembly, keeping the Exterior and Interior Assembly aligned and parallel to the door edge, and the Latch Bolt parallel to the door edge. Restore the lock to the factory default setting and use new 4 AA dry batteries.
  • F
    freevesAug 28, 2025
    What to do if I failed to set up my Philips Door locks?
    • J
      jerry58Aug 28, 2025
      If you failed to set up the lock of your Philips Door locks, ensure the lock is installed correctly, insert fresh batteries, and make sure the cable is not pinched. After installation, reset the lock to factory settings to complete the lock setting process.
  • S
    Sean MartinezAug 29, 2025
    Why is there no picture on my Philips Monitor?
    • R
      Robert MoranAug 29, 2025
      There are several reasons why your Philips Monitor might not be displaying a picture: 1. The power cord might be disconnected; plug it in. 2. The main power switch on the back of the display might not be switched on; ensure it is on. 3. The selected input might have no connection; connect a signal to the display. 4. The display might be in standby mode.
  • A
    amanda54Aug 30, 2025
    Why is no coffee brewed or coffee is brewed slowly in my Philips Coffee Maker?
    • J
      Jordan NelsonAug 30, 2025
      If no coffee is brewed, it's brewed slowly, or it comes out drop by drop from your Philips Coffee Maker, several factors could be at play. The coffee grind might be too fine, or the circuit may not be primed. The brew group or dispensing spout could be dirty, or limescale might be clogging the machine circuit. To address this, you can change the coffee blend or adjust the grinding. Clean the dispensing spout and its holes. Descale the machine.
  • J
    jenniferpachecoAug 30, 2025
    What to do if my Philips Coffee Maker dispenses no hot water or steam?
    • D
      dpattersonAug 30, 2025
      If no hot water or steam is dispensed from your Philips Coffee Maker, the hole of the steam/hot water wand may be clogged. Clean the hole of the steam wand using a pin. Descale the machine.
  • Y
    ycortezAug 31, 2025
    How to make coffee hotter in my Philips Coffee Maker?
    • N
      Nathan WalshAug 31, 2025
      If the coffee from your Philips Coffee Maker is not hot enough, preheat the cups with hot water. Also, ensure the temperature setting is correctly adjusted.
  • P
    Paul CastroAug 25, 2025
    What to do if Philips Door locks only locks but does not unlock?
    • Z
      zvillanuevaAug 25, 2025
      If your Philips Door locks only locks but does not unlock, or the Latch Bolt goes in and out uncontrollably, it might be due to a problem with the door frame. Ensure the hole in the door frame is drilled a minimum of 1"(25mm) deep to provide enough space for the deadbolt. It can also be because of the lock handing or installation. Restore the lock to the factory default setting. If that doesn't work, re-install the lock and reset it again. If the issue persists, further assistance may be needed.
  • J
    jose14Sep 1, 2025
    What to do if the descaling cycle cannot be completed on my Philips Coffee Maker?
    • R
      Rhonda DudleySep 1, 2025
      If the descaling cycle cannot be completed on your Philips Coffee Maker because not enough water is dispensed for the rinse cycle, press the on/off button and follow the instructions.

Overview

This document is the user manual for the Philips 4000 Series Headphones, model TAN4207. It provides essential information for safe operation, setup, usage, and maintenance of the wireless Bluetooth headphones.

Function Description:

The Philips TAN4207 headphones are wireless Bluetooth neckband headphones designed for convenient hands-free calls and wireless music control. They allow users to enjoy and control music wirelessly, switch between calls and music, and connect to various Bluetooth-enabled devices such as mobile phones, notebooks, tablets, and MP3 players. The headphones feature an integrated battery for portable use and come with replaceable ear caps and ear fins for a comfortable fit.

Important Technical Specifications:

  • Music Time: 20 hours
  • Talk Time: 11 hours (at 100% volume)
  • Standby Time: 50 hours
  • Charging Time: 2 hours
  • Battery: Rechargeable lithium polymer, 150 mAh
  • Bluetooth Version: 5.3
  • Compatible Bluetooth Profiles:
    • HFP (Hands-Free Profile)
    • A2DP (Advanced Audio Distribution Profile)
    • AVRCP (Audio Video Remote Control Profile)
  • Supported Audio Codecs: SBC
  • Frequency Range: 20 – 20kHz
  • Transmitter Power: ≤ 10 dBm
  • Operating Range: Up to 10 meters (33 feet)
  • Speaker Driver: 10mm
  • Impedance: 16Ω±15% at 1000Hz 1mW
  • Sensitivity: 96dB±3dB at 1000 Hz at 0.126V
  • Distortion: <5%@1kHz THD
  • Maximum Power Input: 3mW
  • Charging Port: USB-C
  • Auto Power Off: Yes
  • Low Battery Warning: Available
  • IP Rating: Specific product IP rating (details not explicitly stated in the provided excerpt, but mentioned in safety instructions).
  • Storage Temperature: -20°C (-4°F) to 50°C (122°F) with up to 90% relative humidity.
  • Operating Temperature: 0°C (32°F) to 45°C (113°F) with up to 90% relative humidity.

Usage Features:

  • Controls: The headphones feature an LED indicator, Volume + and - buttons, a Power button, a Multi-function button (MFB), and a Type C charging slot.
  • Power On/Off:
    • Turn on: Press and hold the Power button for 2 seconds. The white LED will be on for 1 second.
    • Turn off: Press and hold the Power button for 4 seconds. The white LED will be on for 1 second.
  • Pairing:
    • Ensure headphones are fully charged and off.
    • Press and hold the Power button for 4 seconds until the blue LED flashes.
    • Activate Bluetooth on your mobile phone and select "Philips TAN4207."
    • Enter "0000" if prompted (not required for Bluetooth 3.0 or higher).
    • The headphones store the last 4 paired devices; the earliest paired device is replaced if more than 4 devices are paired.
    • If no Bluetooth device is connected within 5 minutes, the headphones will automatically switch off to save battery.
  • Music Control:
    • Play/Pause music: Press the MFB once.
    • Adjust volume: Press +/-.
    • Next track: Long press +.
    • Previous track: Long press -.
  • Call Control:
    • Answer/Hang up a call: Press the MFB once.
    • Reject a call: Long press the MFB.
  • Voice Assistant:
    • Trigger voice assistant (Android/iOS): Press the MFB for 2 seconds.
  • LED Indicators:
    • Connected to Bluetooth/Standby/Listening to music: Blue LED flashes once every 4 seconds.
    • Ready for pairing: Blue and white LEDs flash alternately.
    • On but not connected: Blue LED flashes twice every 3 seconds; turns off within 5 minutes if no connection.
    • Low battery: White LED flashes twice every minute until out of power.
    • Charging: White LED turns on.
    • Battery fully charged: White LED turns off.
  • Automatic Reconnection: The headphones automatically reconnect to the last connected mobile phone/Bluetooth device if available. If not, they enter pairing mode.
  • Safety Guidelines: Listen at reasonable volumes, avoid continuous upward volume adjustment, do not turn up volume so high as to block out surroundings, use caution in hazardous situations, avoid excessive sound pressure, and avoid distractions from music/calls in traffic or dangerous environments.

Maintenance Features:

  • Charging:
    • Use the supplied Type-C charging cable.
    • Connect to the charging slot on the headphones and a charger/USB port of a computer.
    • The white LED turns on during charging and turns off when fully charged.
    • A full charge typically takes 2 hours.
    • Do not charge when the connector or socket is wet.
    • Finish calls before charging, as connecting to charge will power off the headphones.
  • Cleaning: Use a soft cloth, dampened with a minimum amount of water or diluted mild soap, if necessary. Avoid cleaning agents containing alcohol, ammonia, benzene, or abrasives.
  • Storage: Store in a place with temperatures between -20°C and 50°C with up to 90% relative humidity.
  • Battery Care:
    • Do not expose the integrated battery to excessive heat (sunshine, fire, etc.).
    • Danger of explosion if the battery is incorrectly replaced; replace only with the same or equivalent type.
    • Disposal of a battery into fire, a hot oven, or mechanically crushing/cutting can result in an explosion.
    • Leaving a battery in extremely high temperatures or extremely low air pressure can result in explosion or leakage of flammable liquid/gas.
    • Battery life may be shorter in high or low temperature conditions.
  • Factory Reset: Power on the headphones, then press and hold the Volume + and Volume - buttons together for more than 4 seconds.
  • Disposal: The product contains a built-in rechargeable battery that should not be disposed of with normal household waste. It is advised to take the product to an official collection point or a Philips service center for professional battery removal and proper recycling. The product is designed with recyclable materials.
  • Compliance: The device complies with FCC rules (Part 15), RED Directive 2014/53/EU, UK Radio Equipment Regulations SI 2017 No 1206, and Canadian Innovation, Science and Economic Development RSS(s). It also complies with applicable standards for exposure to electromagnetic fields (EMF).

Philips TAN4207 Specifications

General IconGeneral
BrandPhilips
ModelTAN4207
CategoryTV
LanguageEnglish

Related product manuals