Philips TAT3519 - Reset the Earpieces; Technical Data

5 Reset the
earpieces
1
2
3
4
5
6
On your Bluetooth device, go to the
Bluetooth menu and remove Philips
TAT3519 from the device list.

your Bluetooth device.
Return earpieces to charging box
and open the lid.
Press button on box twice.
Follow steps in “Use your earpieces-
connect the earpieces to your
Bluetooth device.”
Pair the earpieces with your
Bluetooth device, select Philips
TAT3519.
If you encounter any pairing or connection
issue, you can follow the following
procedure to reset your earpieces to
factory default settings.
If there is no response from the
earpieces, you can follow the below step
to reset the hardware of your earpieces.
Return earpieces to charging box and
open the lid, press the button on box

12 EN
6 Technical data
Music play time (ANC on) :
6 + 12 hours

8 + 16 hours
Charging time: 2.5 hours
Lithium-ion battery 58 mAh on
each earpiece, Lithium-ion battery

Bluetooth version: 5.3

 
• A2DP (Advanced Audio

• AVRCP (Audio Video Remote

• TMAP(Telephony and Media

Supported audio codecs: LC3, SBC



(33 feet)

USB-C port for charging
Low battery warning: available
 
notice.
Note