Philips TAT5506 - Power On;O; Manage Your Calls and Music; Voice Assistant

Dierent ANC mode can be toggled via
double tap on the right earpiece.
• ANC function is auto active when
put into the ear
• Touch the MFT twice, it will change
to awareness mode
• Touch the MFT twice again, it will
turn the ANC function o
Task
ANC ON Right
earpiece
Right
earpiece
Double tap
Double tapAwareness
mode
ANC OFF Right
earpiece
Right
earpiece
Double tap
Continue
touching
after beep
Quick
awareness
MFT Operation
9 EN
Control ANC (Active Noise
Cancellation)
Enable ANC
ANC ON
Awareness
mode
ANC O
 The earpieces cannot connect to more than 1
device at the same time. If you have two paired
Bluetooth devices, only turn on the Bluetooth
function of the device that you want to connect.
 If you turn on the Bluetooth function of your
Bluetooth device after turning on the earpieces,
you have to go to the Bluetooth menu of the
device and connect the earpieces to the device
manually.
 If the earpieces fail to connect to any Bluetooth
device within 3 minutes, it will turn o
automatically to save the battery life.
 In some Bluetooth devices, connection may not
be automatic. In this case, you have to go to the
Bluetooth menu of your device and connect the
earpieces to the Bluetooth device manually.
The blue LED ashes
The earpieces will search the last
connected Bluetooth device and
reconnect to it automatically. If
the last connected device is not
available, the earpieces will enter
pairing mode
4 Use your
earpieces
Turn on the Bluetooth function of
your Bluetooth device.
Open the charging box cover.
Connect the earpieces to
your Bluetooth device
Tip
Note
1
2
 Removing the earpieces will automatically
activate sleep mode. When you put the
earpieces back they will return to active mode.
Tip