OSD Adjustments (Continued)
109B6 CRT
Go to cover page
13
5) Press the button to confirm your selection and return to the MAIN
CONTROLS window. CLOSE MAIN CONTROLS will be highlighted.
Smart Help After returning to MAIN CONTROLS...
... To continue to EXTRA CONTROLS, press the button until EXTRA
CONTROLS is highlighted. Next, start with step 3 under EXTRA CONTROLS.
...To exit completely, press the button.
ADJUST MOIRE
EXTRA CONTROLS is a set of three feature, including ADJUST MOIRE.
Moire is a fringe patten arising from the interference between two
superimposed line pattens. To adjust your moire, follow the steps below.
Note: use only if necessary. By activating ADJUST MOIRE, sharpness can
be affected.
1) Press the button on the monitor. The MAIN CONTROLS window
appears.
2) Press the button until EXTRA CONTROLS is highlighted.
EXTRA CONTROLS
3) Press the button. The EXTRA CONTROLS window appears.
ADJUST MOIRE will be highlighted.
4) Press the button. The ADJUST MOIRE window appears.
HORIZONTAL will be highlighted.
5) To adjust the horizontal moire, press the or button.
6) When the horizontal moire is adjusted, press the button to
highlight VERTICAL.
7) To adjust the vertical moire, press the or button.
8) When the vertical moire is adjusted, press the button to return
to the EXTRA CONTROLS window. BACK TO MAIN CONTROLS will
be highlighted.
Smart Help After returning to MAIN CONTROLS...
... To continue to DEGAUSS, press the button until DEGAUSS is
highlighted. Next, start with step 3 under EXTRA CONTROLS,
DEGAUSS.
...To exit completely, press the button.
EXTRA CONTROLS is a set of three feature, including DEGAUSS.
Degaussing remove electromagnetic build up that may distort the color
on your screen.
1) Press the button on the monitor. The MAIN CONTROLS window
appears.
2) Press the button until EXTRA CONTROLS is highlighted.
DEGAUSS
1280X1024
80K/75HZ
To Next Page
Loading...
