Philips V40 109B6 - Adjust Color

12
109B6 CRT
Go to cover page
7) When the rotation is adjusted, press the button to return to
the ADJUST SHAPE window. BACK TO MAIN CONTROLS should
be highlighted.
8) Press the button to return to MAIN CONTROLS.
Smart Help After returning to MAIN CONTROLS...
... To continue to ADJUST COLOR, press the button until ADJUST
COLOR is highlighted. Next, start with step 3 under ADJUST COLOR
and follow the directions.
... To exit completely, press the button twice.
ADJUST COLOR
Your monitor has two preset options you can choose from. The first
option is for GENERAL USE, which is fine for most applications. The
second option is for GAMES, which is for playing computer games.
When you select one of these options, the monitor automatically
adjusts itself to that option. There is also a third option, USER PRESET,
which allows you to adjust the colors on your screen to a setting you
desire.
1) Press the button on the monitor. The MAIN CONTROLS window
appears.
2) Press the button until ADJUST COLOR is highlighted.
3) Press the button. The ADJUST COLOR window appears.
4) Press the or button to highlight 9300K for GENERAL
USE. 6500K for GAMES, or USER PRESET.
5) Once you have highlighted the GENERAL USE OR GAMES, press
the button to confirm your selection and return to the MAIN
CONTROLS window. CLOSE MAIN CONTROLS will be highlighted.
6) If USER PRESET is highlighted, press the button to highlight
RED(GREEN BLUE). Next, press the or button to adjust
the color red(green blue).
7) When all adjustments are complete, press the button until
RESET TO FACTORY SETTINGS is highlighted. Next, start with
step 3 under RESET TO FACTORY SETTINGS.
...To exit completely, press the button.
RESETTOFACTORYSETTINGS
RESETTOFACTORYSETTINGSreturnseverythinginallthewindows
to factory presets.
1) Press the button on the monitor. The MAIN CONTROLS window
appears.
2) Press the button until RESET TO FACTORY SETTING is
highlighted.
3) Press the button. The RESET TO FACTORY SETTINGS
window appears.
4) Press the or button to select YES or NO. NO is the
defaults. YES return all settings to their original factory
adjustments.
OSD Adjustments (Continued)