Mechanical Instructions
109B6 CRT
Go to cover page
17
Screw
Fig. 6
Fig. 6
Video panel
Main panel
Fig. 9 SERVICE POSITION
Pull-up
Fig. 8
4. Main panel with Bottom Tray
-Remove the screws for disconnect the Bottom tray as Fig. 6.
-Open the click and remove the screws on the main board from
fig. 6 to fig.7.
5. SERVICE POSITION
-reconnect connectors, some wires and panels (chassis),
service position can be available for DC/AC measurement
as shown inFig.8 Fig. 9.
Fig.7
Fig.9
To Next Page
Loading...
