Philips V40 109B6 - Page 5

Go to cover page
109B6 CRT
5
Installation
Front View
Power button switches your monitor on.
OK button which when pressed will take you to the OSD controls
Contrast hotkey. Whenthe "-" button is pressed, the adjustment
controls for the CONTRAST will show up.
Brightness hotkey. Whenthe "+" button is pressed, the adjustment
controls for
BRIGHTNESS will show up.
"-" and "+" buttons, are used for adjusting the OSD ofyour monitor
RearView
1.Power in - attach power cable here.
2. VideoIn- this is a cablewhich is already attached to
your monitor. Connectthe other end of the cable to your PC.