Philips VR700/02 - Remote Control and Audio Features; Using Remote Control with TV; Manual Audio Control and Recording

Automatic switch-off (tuner mode)
If you do not use the video recorder for a few minutes in
certain modes (e.g.: STOP), it will switch to standby
automatically. You can cancel this function to use the video
recorder as a television receiver (tuner).
a Switch on the TV set and select the programme number
for the video recorder.
b Press the MENU button. The main menu appears.
c Select the line ’SPECIAL SETTINGS’ with the P = or
;P button and confirm with the menu button P .
d Select the line ’AUTO STANDBY’ with the P = or
;P button.
e Select ’OFF’ with the Q or P button. If you select
’ON’, the function will be switched on.
f Confirm with the OK button.
g To end, press the MENU button.
DA TIMER recording only works when the video
recorder is switched to standby.
The ’DEMO’ function
When the ’DEMO’ function is switched on and the video
recorder switched off, several menus will be demonstrated on
the TV screen. This has no influence on operating the video
recorder.
a Switch on the TV set and select the programme number
for the video recorder.
b Press the MENU button. The main menu appears.
c Select the line ’SPECIAL SETTINGS’ with the P = or
;P button and confirm with the P button.
d In the line ’DEMO’, select ’ON’ with the P or Q button.
If you select ’OFF’ the function will be switched off.
e Confirm with the OK button.
f To end, press the MENU button.
DThe ’DEMO’ function is not possible during a ’TIMER
recording’ and during an ’Automatic recording from
a satellite receiver’.
27