6
When the tape has finished rewinding, press the
STOP/EJECT button on the VCR to remove the tape.
4
Press the STOP button to stop playback.
5
Press the REW(ind) button to rewind the tape.
Playing 23
Read and follow the steps below to play a tape.
1
Turn on the TV and set it to channel 3 or 4, whichever chan-
nel to which the CH3/CH4 switch on the back of the VCRis set.
2
Insert a tape in the VCR. The POWER, VCR/TV, and CST.IN
lights will appear. If the tape’s record tab has been removed, play-
back will begin automatically. (Tab details are on page five.)
3
If playback does not start automatically, press the PLAY
button.
Turn on the TV.
Insert a tape.
3
1
2
• If the tape you want to play is
already in the VCR, make sure the
VCR power is on and the VCR is in
VCR position. (Press the VCR/TV
button so that the VCR/TV light
appears.) Then, press the PLAYbut-
ton.
• Other playback options and fea-
tures are on pages 33-37.
• If AUTO REPEAT is set to ON, play-
back will begin automatically, even
when the record tab is intact.
Details are on page 33.
Helpful Hints
4
5
S-VHS Quasi Play Back (SQPB)
This VCR has a SQPB function that lets you view a tape recorded
in S-VHS format. A tape recorded in S-VHS format will play the
same as a tape recorded in normal format.
When you play an S-VHS tape, you can not get the picture quality
that would be available on an S-VHS VCR. Noise lines (black and
white streaks) may appear on the picture.
Press the STOP/EJECT but-
ton on the VCR.
6
To Next Page
Loading...
