GB7
WelcomeEye Connect 2 / Touch / V4
Note: If the icon does not appear on the second line, reset the WiFi by clicking on
, then wait for the icon to appear (about 30 seconds).
For ease of use, make sure your phone is connected to the 2.4GHz WiFi network that will
need to be connected to the monitor.
4. From the WelcomeEye application, click
on + to add a device.
5. Click on new device
and then next
6. The application tells you where to nd
the QR Code that you will need to scan.
Click on “suivant” (next).
7. Scan the QR Code of your videophone
as shown on the previous page.
To Next Page
Loading...
