4. Installation
8
Fig.5
4.1 Installation Precautions
4.1.1 To ensure that the installation is performed correctly and that the appliance will perform
perfectly, please carefully follow the instructions indicated in this manual. Fail to respect the
rules indicated not only can cause malfunctions of the appliance but also invalidate the
warranty, hence our company shall not respond for any damage to persons, animals or
property.
4.1.2 It is important that the electrical installation is made according to the laws in force,
respects the data indicated in the technical sheet and the unit is correctly earthed.
4.1.3 The appliance must be installed in a position that allows the routine maintenance, such
as filter cleaning.
4.2 Positioning
4.2.1 Avoid installing the unit in proximity to:
-positions subject to exposure to direct sunlight;
-sources of heat;
-in places with oil fumes
-places subject to high frequencies.
4.2.2 Make sure that:
-the wall on which the unit is to be installed is strong enough to support the weight;
-the part of the installation wall does not have pipes or electric wires passing through;
-the installation wall is perfectly flat;
-there is an area free of obstacles which could interfere with the inlet and outlet air flow;
-it is preferably that there is an outside perimeter-wall to allow the discharge of condensation
outside;
4.3 Minimum Installation Distances
4.3.1 Removing the four rubber feet of the unit are suggested if hanging it on the wall.
4.3.2 Fig. 5 indicates the minimum mounting distances between the wall-mounted swimming
pool dehumidifier and furniture in the room.
0.2m
0.5m
0.2m
0.2m
3. Specifications
3.5.1 Ultra-low noise
With the advanced air ducting technology and the super quiet cross-flow fan, the unit can
operate with ultra-low noise.
3.5.2 Ultra-thin casing
With the ultra-thin casing of 200mm, which is the result of compact design, the unit can
save more space for you when it is compared with the common dehumidifierswith the
thickness of 400mm.
3.5.3 Fashionable appearance
With noble &fashion arc frame and elegant & graceful snow white color, the unit will be
perfectly combined with your pool house.
3.5.4 Newly design controller.
With simple operating display, the newly developed controller makes the unit operation
easier and more user-friendly.
3.6.1 The dehumidifier is controlled by a built-in hygrostat set on one side of the unit and
the target RH value can be set ranges from 30% to 90%.
3.6.2 The unit will not start to dehumidify until the actual RH is beyond the setting value.
3.6.3 We recommend that an external hygrostat should be installed to ensure a constant
measure of the humidity in the pool area.
3.6.4 The location of hygrostat is as the following (Fig.4):
3.6 Hygrostat Control
3.5 Product Features
7
Built-in hygrostat
Fig.4
To Next Page
Loading...
Need help?
General