Do you have a question about the Phoenix Contact FL MGUARD Series and is the answer not in the manual?
Product Series | FL MGUARD |
---|---|
Category | Security System |
Firewall | Yes |
VPN | Yes |
VPN Support | IPsec, OpenVPN |
Operating Temperature | -20°C to +60°C |
Housing Material | Metal |
Protection Class | IP20 |
Approvals | CE, FCC, UL |
Configuration | Web-based, CLI |
Operating Voltage | 24 V DC |
Ethernet Ports | 4 |
Firewall Type | Stateful Inspection |
Details different FL MGUARD device models and their connectivity options.
Details the operating elements and LEDs for the RS2000/4000 models.
Describes the operating elements and LEDs for the FL MGUARD SMART2 model.
Details the operating elements and LEDs for the FL MGUARD PCI4000 model.
Explains the operating elements and LEDs for the FL MGUARD DELTA TX/TX model.
Provides essential safety precautions for installing and operating the FL MGUARD.
Instructions on verifying all components are present before starting the device.
Details mounting and connection procedures for RS4000/RS2000 models.
Step-by-step guide for mounting and removing the device from a DIN rail.
Instructions for connecting the FL MGUARD to a network via LAN ports.
Explains the function and connection of service contacts on the device.
Details the use of buttons, switches, LEDs, and signal contacts for device operation and monitoring.
Provides instructions for connecting the DC power supply to the FL MGUARD.
Details the setup and implications of using a redundant power supply for the RS4000 model.
Guides on connecting the FL MGUARD SMART2 to networks and computers.
Instructions for installing the FL MGUARD PCI4000 into a PC.
Step-by-step guide for physically installing the PCI card.