Need help?Do you have a question about the Phoenix Contact FL WLAN 1100 and is the answer not in the manual?
General| Product Name | FL WLAN 1100 |
|---|---|
| Wireless Standard | IEEE 802.11 a/b/g/n |
| Frequency Band | 2.4 GHz / 5 GHz |
| Data Rate | Up to 300 Mbps |
| Operating Voltage | 24 V DC |
| Protection Class | IP20 |
| Weight | 300 g |
| Interface | Ethernet |
| Security | WPA, WPA2, WEP |
| Configuration | Web-based |
Overview of the robust, compact WLAN module with integrated antennas and key features.
Identifies and describes the physical connections and operating elements of the device.
Explains the electrical connections for power, Ethernet, and reset functions.
Outlines essential safety precautions and guidelines for installing the device.
Details the typical steps involved in starting up and commissioning the device.
Guides on assigning an IP address using the IPAssign tool via BootP.
Step-by-step instructions for using the IPAssign.exe tool to assign IP addresses.
Instructions for initiating device setup and configuration using its web interface.
Describes the different operational modes supported by the device.
Explains functionality and parameters when the device operates as an Access Point.
Details how the device functions when operating as a WLAN client.
To Next Page
