Need help?Do you have a question about the Phoenix Contact FL WLAN 2100 and is the answer not in the manual?
General| Model | FL WLAN 2100 |
|---|---|
| Wireless Standard | IEEE 802.11a/b/g/n |
| Max Data Rate | 300 Mbps |
| Protection Class | IP20 |
| Frequency Band | 2.4 GHz |
| Antenna Connection | RP-SMA |
| Configuration | Web-based |
| Security | WPA2 |
| Operating Voltage | 24 V DC (12 V DC ... 48 V DC) |
Details supply voltage, Ethernet, reset connection, and essential grounding procedures.
Covers safety precautions, ESD, RF emission, power supply, and device modification warnings.
Outlines startup steps, IP assignment via BootP/IPAssign, and factory reset procedures.
Guides on accessing and using the web interface, including icons, buttons, and quick setup.
Details Access Point, Client (SCB, MCB, FTB), and Repeater modes with their configurations.
Explains firmware update procedures using HTTP or TFTP via the web interface.
Introduces CLI for device configuration and diagnostics via Telnet/SSH.
Covers CLI command structure, parameters, and usage rules.
Explains using help commands and auto-completion for efficient CLI operation.
Monitors WLAN signal strength graphically in Client mode using RSSI values.
Scans and diagnoses WLAN channel usage in Access Point mode to find free channels.
To Next Page
