Phoenix Contact FL WLAN 1000 Series User Manual

User manual
Mounting and installation of
FL WLAN 1000/2000 product family

Phoenix Contact FL WLAN 1000 Series Specifications

General

Brand	Phoenix Contact
Model	FL WLAN 1000 Series
Category	Control Unit
Language	English

Summary

Safety and User Guidance

Warning Note Identification

Explains hazard symbols (DANGER, WARNING, CAUTION) and signal words.

Safety and Installation Precautions

Details safety precautions for RF energy, ESD, power supply, and operation.

Industrial Network Security

Mounting and Antenna Configuration

Device Connections and Elements

Identifies physical ports, LEDs, and mounting features on the device.

Electrical Connection Details

Details the wiring for power, Ethernet, and reset functions.

RJ45 Ethernet Pin Assignment

Device Grounding Procedures

Explains the importance and methods of device grounding for safety.

Mounting on Level Surfaces

Sealed Cable Feed-through Mounting

Seal Tightness and Strain Relief

Mounting Considerations for Internal Antennas

Startup and Configuration Procedures

Initial Delivery State and Factory Settings

Diagnostic and Status LED Indicators

General Startup Sequence

Outlines the steps for initial device setup and configuration.

IP Address Assignment via BootP

Guides on using the IPAssign tool for IP address assignment.

Assigning IP Address with IPAssign.exe

Provides step-by-step instructions for the IP assignment process.

Factory Settings Reset

Explains how to reset the device to its default configuration.

Detailed Factory Reset Instructions

Provides step-by-step guidance for factory reset using digital input.