Need help?Do you have a question about the Phoenix Contact FL EPA 2 and is the answer not in the manual?
General| Number of ports | 2 |
|---|---|
| Port Type | Ethernet |
| Redundancy | Yes |
| Protection level | IP20 |
| Protection class | III |
| Number of inputs | 0 |
| Input voltage range | 24 V DC (18 V DC ... 30 V DC) |
| Connection technology | RJ45 |
Provides critical safety information regarding RF energy, electrostatic discharge (ESD), and handling.
Provides an assembly drawing with dimensions for mechanical installation, noting antenna connection for RSMA models.
Describes the Power and LAN M12 connectors, including pin assignments and functions, with important notes on digital input behavior.
Detailed steps for using the MODE button to configure or reset the device.
Explains activating Easy Config modes using the web interface's dropdown menu and "Set" button.
Details various Easy Config modes, their roles, and LED indications for automatic configuration.
Describes the "System Overview" page for current settings and connections.
Details network settings like IP assignment, IP address, subnet mask, and gateway.
Guides on configuring WLAN for client mode, including network scanning, SSID, and authentication.
Details WLAN settings for access point mode, including SSID, authentication, passkey, and channel.
Covers general Bluetooth settings like enabling, operating mode, local name, and security modes.
Provides mode-specific Bluetooth settings for PANU and NAP modes, including connection schemes.
To Next Page
