Phoenix Contact CONTACTRON Series

Need help?

Do you have a question about the Phoenix Contact CONTACTRON Series and is the answer not in the manual?

Summary

User manual

EMM 3-...;500 AC...-IFS electronic motor management module

Safety regulations;installation notes

Crucial safety warnings, installation guidelines, and scope of use for EMM modules.

Safety functions

Details on system conditions and safety levels for motor protection.

IFS-CONFSTICK-L memory block

Writing the device configuration

Procedure for saving device configuration to the memory block.

Loading the device configuration

Steps to load configuration data onto the EMM module.

EM-PB-GATEWAY-IFS PROFIBUS module

Setting the PROFIBUS address

Procedure for setting the PROFIBUS address using the module's button.

Current transformer selection guide

Three-phase induction motor at a rotational frequency of 3000 rpm

Guide for selecting current transformers for motors at 3000 rpm.

CONTACTRON-DTM-IFS device drivers

Connecting the programming adapter

Instructions for connecting the IFS-USB-PROG-ADAPTER.

Software setup

Step-by-step guide for installing the DTM software.

EMM module parameter menu

Settings

Bimetal

Writing the configuration to the device

Monitoring dialog box

Application examples

Example 4 - Reversing starter in potentially explosive areas (ATEX)

Example 5 - Star;delta

Example 7 - Reversing starter with connection to PROFIBUS

Example 8 - 690 V reversing starter with voltage transducer