Need help?Do you have a question about the Phoenix Contact PSR-ESA2/4x1/1x2/B and is the answer not in the manual?
General| Type | Safety Relay |
|---|---|
| Rated Control Circuit Voltage | 24 V DC |
| Rated Operational Current | 6 A |
| Width | 22.5 mm |
| Safety Integrity Level | SIL 3 |
| Performance Level | PL e |
| Housing color | gray |
| Switching voltage | 250 V AC |
| Protection class | IP20 |
| Mounting Type | DIN rail mounting |
| Category | Category 4 |
| Switching current | 6 A |
| Operating temperature | -20 °C to +60 °C |
| Number of Contacts | 4 normally open (NO) contacts, 1 normally closed (NC) contact |
| Dimensions | 22.5 x 114.5 x 99 mm (W x H x D) |
Details the steps for implementing safety functions according to EN ISO 13849.
Details the steps for implementing safety functions according to EN ISO 62061.
Illustrates the implementation of emergency stop functions with PSRclassic relays.
Example of single-channel emergency stop monitoring with manual reset.
Example of two-channel light grid monitoring with manual reset.
Example of two-channel safety door monitoring with automatic reset.
Example of three-stage enable switch monitoring with automatic reset.
Example of two-hand control device monitoring.
Example of emergency stop monitoring with contact extension.
Details applications combining emergency stop, safety doors, and light grids.
Example of emergency stop and safety door monitoring.
Example of safety door monitoring with emergency stop.
Example of safety door and light grid monitoring with emergency stop.
To Next Page
