Step 4
Check the numbers from the phonebook that you would like to receive the SMS message
In the “Message Text” box, type a custom message that the chosen recipients will receive.
Figure 4 shows an example where the first number in the phonebook will receive a message saying
“Input 1 is HIGH!” whenever the input goes high.
Figure 4: Configure who will receive the message, and what the message will say.
Step 5
Test the SMS functionality by applying 24V to Input 1.
• The status of Input 1 should turn to HIGH
• You should receive a text message from the phone number associated to your SIM card.
Figure 5: Example showing the TC Router sending a text message when Input 1 goes high
Congratulations you have successfully configured the TC
Router to send a SMS Message!
To Next Page
Loading...
