©2010 Phoenix Controls Specifications subject to change without notice. Rev. 5/10 MKT-0266 MPC-1480 FAN STATIC RESET KIT—11 OF 12
PHOENIX RECOMMENDED CABLES
A 3-conductor will typically be used with the FSR100.
Cable
Type
Plenum
Rated
Function
Wire
Gauge
Primary
Vendor/Part #
Alternate
Vendor/Part #
Color Code Notes
2C
Round
No 24 Vac power to
LOSEA or
Pneumatic (110’
max at load
1, 2
)
18 Belden 9409 1: Red
2: Black
Must be
stranded
24 Vac power to
HiSea (288’ max
at load
1, 2
)
14 Belden 9411
2C
Round
Ye s 24 Va c p o w e r t o
LOSEA or
Pneumatic (110’
max at load
1,
2
)
18 Belden 82740 Windy City
NP002360
1: Red
2: Black
Must be
stranded
24 Vac power to
HiSea (288’ max
at load
1, 2
)
14 Windy City
NP007960
TP No FTT-10 (4500’)
TP1250 (425’)
22 Windy City 107500 Connect Air
W221P-1002
1: White/Blue stripe
2: Blue/White stripe
For more
alternatives
visit:
echalon.com
FTT-10 (8800’) 16 Windy City 109600
TP Yes FTT-10 (4500’)
TP1250 (425’)
22 Windy City 105500 Connect Air
W221P-2001
1: White/Blue stripe
2: Blue/White stripe
For more
alternatives
visit:
echalon.com
FTT-10 (8800’) 16 Windy City 109500
3C
Round
No Signal 22 Belden 8443 1: Red
2: Black
3: Green
Must be
stranded
3C or
4C
Round
Yes Signal 22 Belden 88444 Windy City
004380
1: Red
2: Black
3: Green
4: White (not used as 3C)
Must be
stranded
4C
Round
No Signal 22 Belden 8444 Manhatten
M13304
1: White
2: Green
3: Black
4: Red
Must be
stranded
5C
Round
No Signal 22 Belden 8445 Manhatten
M13305
1: White
2: Brown
3: Black
4: Red
5: Green
Must be
stranded
8C No Signal 22 Belden 9421 Manhatten
M13308
1: White
2: Orange
3: Black
4: Red
5: Green
6: Yellow
7: Blue
8: Brown
No
substitutes
8C Yes Signal 22 Comtran 4956 1: White
2: Orange
3: Black
4: Red
5: Green
6: Yellow
7: Blue
8: Brown
No
substitutes
3C
MS/TP
No Shielded 22 Belden 3106A
(120 ohm)
See specifications
below for alternate
cable solutions
1: White with Orange stripe
2: Orange with White stripe
3: Blue with White stripe
Shielded with
drain
To Next Page
Loading...