PHOENIX DIGITAL OCM-DPR-1 - Module Interface and Connector Specifications

DH+/RIO OPTICAL COMMUNICATION MODULES USERS MANUAL
Copyright © 2003 by Phoenix Digital Corporation, All Rights Reserved.
1.3 PRODUCT SPECIFICATIONS
Fiber Optic Module Mounting Dimensions and Connector Designations are provided in Figures
3 thru 6.
1.3.1 DEVICE INTERFACE SPECIFICATIONS
The standalone, panelmount OCM and 1771 plug-in OCM Device Interface Port Connections are
provided on the front of the OCM module (designated as J1 - see Figures 3 and 4).
The 1746 plug-in OLC and 1756 plug-in OCX Device Interface Port Connections are provided on
the bottom of the fiber modules (designated as J2 - see Figures 5 and 6).
The user must follow all Rockwell Allen-Bradley Installation, Wiring Guidelines, and Termination
Procedures for interconnect wiring of DH+ and RIO devices and Phoenix Digital fiber optic modules.
1-8