PHOENIX DIGITAL OCM-DPR-1 - User Manual

DH+/RIO OPTICAL COMMUNICATION MODULES USERS MANUAL
Copyright © 2003 by Phoenix Digital Corporation, All Rights Reserved.
ROCKWELL ALLEN-BRADLEY
DATA HIGHWAY PLUS and REMOTE I/O
COMMUNICATION MODULES
INSTALLATION
and
USERS MANUAL
PHOENIX DIGITAL CORPORATION
7650 E. EVANS RD. BLDG. A, SCOTTSDALE, AZ 85260
Phone: (480) 483-7393
Fax: (480) 483-7391
E-Mail: phxdigital@aol.com
Internet: www.phoenixdigitalcorp.com
0414-1400 REV A

PHOENIX DIGITAL OCM-DPR-1 Specifications

General

Brand	PHOENIX DIGITAL
Model	OCM-DPR-1
Category	Control Unit
Language	English

Summary

Product Description and Specifications

Introduction to Phoenix Digital Fiber Optic Modules

Overview of Phoenix Digital DH+/RIO fiber optic modules and their capabilities.

Key Product Features: Fault Tolerance and Wavelength

Details fault tolerance, predictive communication, and wavelength selection features.

Module Interface and Connector Specifications

Covers device interface, optical network, and connector pin designations.

Power Supply, Grounding, and Environmental Specifications

Specs for power supplies, grounding, and environmental operating conditions.

Configuration and Installation Instructions

Module Installation Preparation and Mounting

Procedures for unpacking, inspection, and physical installation.

Diagnostic Status Indicator Definitions

Explains LED indicators for module status and diagnostics for various models.

Fiber Optic Module Configuration Settings

Guides on baud rate, network key-up, and switch/jumper configurations.