PHOENIX DIGITAL OCM-DPR-1 - Key Product Features: Fault Tolerance and Wavelength

DH+/RIO OPTICAL COMMUNICATION MODULES USERS MANUAL
Copyright © 2003 by Phoenix Digital Corporation, All Rights Reserved.
OCM MODEL # NETWORK COMPATIBILITY
OCM-DPR-(1)-(2)-(3)-(4)-(5)-(6)-(7) DH+/RIO Communications (1771 Plug-In and
Standalone, Panelmount modules)
OLC-DPR-(1)-(3)-(4)-(6)-(7) DH+/RIO Communications (1746 Plug-In modules)
OCX-DPR-(1)-(3)-(4)-(6)-(7) DH+/RIO Communications (1756 Plug-In modules)
(1) “85” = 850 nanometer wavelength selection
“13” = 1300 nanometer wavelength selection
“15” = 1550 nanometer wavelength selection
(2) “P” = Standalone, Panelmount Enclosure
blank = 1771, 1746, or 1756 Plug-In Module
(3) “D” = Interactive Diagnostics
blank = No Diagnostics
(4) “ST” = ST Fiber Optic Connector Style
“SMA” = SMA Fiber Optic Connector Style (Available with
850nm Wavelength only.)
(5) “24V” = 24 VDC Operation
“ACV” = 120/220 VAC, 50/60 Hz Operation
“125V” = 125 VDC Operation
(6) “SM” = Singlemode Fiber Compatibility (Available with 1300nm
or 1550 nm Wavelengths, and ST connector options only.)
blank = Multimode Fiber Compatibility
(7) “EXT” = Extended Capacity Feature (24+ fiber optic modules on a
single bus or ring network configuration.)
blank = No Extended Capacity Feature (Maximum of 12 fiber optic
modules on a single bus or ring network configuration.)
PRODUCT MODEL NUMBER DEFINITION
TABLE 1
1-2