DH+/RIO OPTICAL COMMUNICATION MODULES USERS MANUAL
Copyright © 2003 by Phoenix Digital Corporation, All Rights Reserved.
After putting the OCX module “Online”, the user may confirm OCX identification information in the
“Module Properties” screen by selecting the “Module Info” tab. The following information should be
provided:
Identification
Vendor: (420) Unknown
Product Type: (128) Unknown
Product Code: (549) Unknown
Revision: x.x
Serial Number: 000xxxxx
Product Name: OCX_DPR_x
Phoenix_Digital_Rx.x
The OCX-DPR module revision level will be 1.2 or above. Module serial numbers will range
between 00000000 and 00099999. The numeric information given above for Vendor, Product
Type, and Product Code have been assigned to the OCX-DPR module. Rockwell anticipates
that RSLogix software will eventually be able to provide this identification information in a
descriptive text format, but as of the date of publication of this manual this capability is not
available in RSLogix software.
Read Diagnostic Status functions are given in the Diagnostic Input Bit Map illustrated in Figure 10.
Definitions of Diagnostic Select Switch Settings are provided in Table 11. Specifications and further
explanation of OCX diagnostic functions are provided in Sections 1.3.3.5-1.3.3.10.
1-26
To Next Page
Loading...