Phoenix Gold TI2 1600.5 User Manual

Amplifier Manual
Manual del Amplificado r
Manuel del’amplificateur
Features: Caractéristiques:
Models: Ti2 1000.4, Ti2 1600.5
• High Eciency Class D Topology
• Compact Size for Easy Installation
• Balanced Dierential Input Circuitry
• Audiophile NJM2068M Operational Ampliers
• Ultra High Speed IR Class D Chipset
• High, Band and Low Pass Crossovers
• ADAPT Power Management System
• Surface Mount Component Technology
• Direct Insert Power and Speaker Terminals
• Audio Precision Quality Control Verication
• High Temperature Plexiglass cover
• Signal Clipping Indicators
• RMD - Remote Monitoring Display Port
• RBCF- Remote Subwoofer Level Control included
(Ti2 1600.5)
• Petit format pour faciliter l’installation
• Topologie de classe D de gamme complète
• Circuit équilibré Entrée diérentielle
• Audiophile NJM2068M Amplicateurs opérationnels
• Haute Vitesse IR de classe D chipset
• Filtres croisés passe-haut et passe-bas
• ADAPT système d’alimentation
• Technologie de composant monté en surface
• Terminaux d’alimentation et de haut-parleurs à
insertion directe
• Vérication du contrôle de la qualité de la précision audio
• Couvercle de plexiglas résistant aux températures élevées
• RMD - Entrée De L’achage de Tension a Distance
• RBCF- Niveau de contrôle de passe-bas inclus (Ti2 1600.5)
Características:
• Alta eciencia de clase D Topología
• Tamaño compacto para fácil instalación
• Diferencial balanceada circuitos de entrada
• Audiophile NJM2068M amplicadores operacionales
• IR Chipset Ultra Alta Velocidad
• Crossovers paso alto y bajo
• ADAPT Sistema de Gestión de Energía
• Tecnología “Surface Mount Component”
• Conexiones directas de terminales de poder y de
parlantes
• Control de vericación de calidad de precisión de audio
• Cubierta de Plexiglás resistente a altas temperaturas
• RMD - Puerto de display para monitoreo remoto
• RBCF - Control de nivel de Subwoofer remoto incluido
(Ti2 1600.5)

Phoenix Gold TI2 1600.5 Specifications

General

Channels	5
Frequency Response	10Hz - 30kHz
Signal-to-Noise Ratio	>90dB
THD	<0.05%
Damping Factor	>200
Input Sensitivity	200mV - 6V
Subsonic Filter	10Hz - 50Hz
Power Output (RMS)	1600W
Crossover	Variable
Bass Boost	0-18dB @ 45Hz

Summary

Phoenix Gold Amplifier Manual Introduction

Key Product Features

Lists the primary features and capabilities of the Phoenix Gold amplifiers.

Supported Amplifier Models

Identifies the specific amplifier models covered by this manual.

Phoenix Gold Amplifier Technical Specifications

Ti2 1000.4 Specifications

Detailed technical data for the Ti2 1000.4 amplifier, including performance metrics.

Ti2 1600.5 Specifications

Detailed technical data for the Ti2 1600.5, covering front/rear and subwoofer channels.

Phoenix Gold Amplifier Key Feature Explanations

Balanced Differential Input Circuitry

Explains how differential inputs improve noise rejection for clearer audio.

Audiophile NJM2068M Op-Amp Performance

Details the advantages of the NJM2068M op-amp over standard alternatives.

Ultra High Speed IR Class D Chipset

Describes the advanced Class D chipset for enhanced audio performance.

Post Filter Feedback Mechanism

Explains the feedback loop's role in ensuring amplifier stability and sound accuracy.

ADAPT Power Management System

Details how ADAPT technology optimizes power delivery and efficiency.

Thermal Rollback Circuit Protection

Explains the thermal protection feature that adjusts output under high temperatures.

EMI Circuit Board Design

Highlights the EMI reduction design for improved signal integrity and reduced interference.

Amplifier Controls and Connections Guide

Ti2 1000.4 Input and Crossover Controls

Guides users on setting up preamp inputs, crossover frequencies, and configurations.

Ti2 1000.4 Rear Panel Connections

Details the power, remote, ground, RMD, and speaker output terminals.

Ti2 1000.4 Clip Indicator Function

Explains the purpose and interpretation of the clip indicators for optimal performance.

Ti2 1600.5 Input and Crossover Controls

Explains setup for preamp inputs, crossover frequencies, and sub input selection.

Ti2 1600.5 Rear Panel Connections

Details the power, remote, ground, RMD, and speaker output terminals.

Ti2 1600.5 Special Controls

Guides users on operating the SENS, Phase, and Remote Bass Level Control (RBCF).

Ti2 1600.5 Clip Indicator Function

Explains the purpose and interpretation of the clip indicators for optimal performance.

Crossover Frequency Setting Details

Ti2 1000.4 Crossover Frequency Tables

Provides tables mapping control clicks to specific crossover frequencies for the Ti2 1000.4.

Ti2 1600.5 Crossover Frequency Tables

Provides tables for front/rear and subwoofer crossover settings for the Ti2 1600.5.

Phoenix Gold Product Warranty and Information

Limited Warranty on Amplifiers

Details the product warranty period, coverage terms, and exclusions.

International Warranty Policies

Outlines warranty coverage and service for products purchased internationally.