Phoenix Gold TI800.4 - User Manual

Amplifier Manual
Manuel de l’amplificateur
Features
Models: Ti1500.1, Ti2500.1
Ti600.4, Ti800.4
© 2010 Phoenix Gold • www.phoenixgold.com
• 24dBVariableLowPassandSubsonicCrossovers(Ti2500.1,Ti1500.1)
• 18dBVariableHighandLowPassCrossovers(Ti800.4,Ti600.4)
• Crossoversfeature41DetentsforExactFrequencySelection
• AudiophileBi-PolarOutputTransistors(Ti800.4,Ti600.4)
• HighEfciencyClassDTopology(Ti2500.1,Ti1500.1)
• MassiveUnregulatedPowerSuppliesfeaturingHandWoundTransformers
• PowerOutputPeakIndicators
• 1/0GaugeDirectInsertPowerTerminals
• LPL44-LowPassLevelControlReady
• RMD-RemoteMonitoringDisplayPort
• AdvancedThermalandProtectionCircuitry
phoenix gold ti amp manual.indd 1 3/2/10 11:20:39 AM

Phoenix Gold TI800.4 Specifications

General

Channels	4
RMS Power @ 4 Ohms	100W x 4
RMS Power @ 2 Ohms	200W x 4
Bridged RMS Power @ 4 Ohms	400W x 2
Frequency Response	10Hz - 30kHz
THD at Rated Power	<0.05%
Signal to Noise Ratio	> 100dB
Input Sensitivity	200mV - 6V
Crossover Slope	12dB/Octave
Bass Boost	0-18dB @ 45Hz