17
Do not hold the tube to remove the CROS device from
the charger as this can damage the tube.
To prevent discharge, turn o your CROS device
before storing it in the disconnected charger.
To prevent discharge, turn o your CROS device after
unplugging the charger with the CROS device
charging inside.
Always close the lid when charging your CROS device
in a humid environment.
3.
Remove the CROS device from the charging slot by
simply lifting it out of the charger.
The CROS device can be set to switch on automatically
when removed from the charger. In this case the indicator
light start
s blinking. The solid green light indicates the
CROS device is ready for use.
To Next Page
Loading...
Need help?
General
