Phonak Roger On iN User Manual

40 41
Connecting another microphone is only required once.
The other microphone will remain connected with
your Roger On even after the microphones have been
restarted.
3. Press the Connect button on your Roger On.
4. Check the feedback in the display of Roger On:
Connect
successful
Device not
compatible
No device found,
go closer
8 s
10.3 Disconnecting Roger devices
To disconnect your Roger On from any
connected receivers or other Roger
microphones, hold the ‘Connect’
button for 8 seconds until you
see this display information:

Phonak Roger On iN Specifications

General

Brand	Phonak
Model	Roger On iN
Category	Hearing Aid
Language	English