Phonic i2600 - Page 11

7
i2600
English
8.B.1bb Input A/B PEQ[x]
[Freq]
-> Edit Freq = 1000Hz PM1 N/A [Freq.] 20Hz [Freq.] 20Hz
: :
20kHz [10Hz Step] 20kHz [1Hz Step]
8.B.1c. If you selected a Lo-Shelv_Q (variable Q Low Shelving) lter,
then the lter can be set by the following parameters
Input A/B PEQ[x] (up to 7 lters available)
[Freq] [Gain] [Q]
-> 1000Hz +0.0dB Q=1.00 [Freq.] 20Hz [Amp.] -12.0 dB [Q] 0.30
: : :
20kHz [1Hz Step] +12.0 dB 20.00
8.B.1cb Input A/B PEQ[x]
[Freq]
-> Edit Freq = 1000Hz PM1 N/A [Freq.] 20Hz [Freq.] 20Hz
: :
20kHz [10Hz Step] 20kHz [1Hz Step]
9. Input A/B Fbk/SH
Sel App = Feedback Elim
-> Sel App = Feedback Elim PM1 N/A Sel App = Feedback Elim Same as PM2
Sel App = Sub Harmonics
10. The Menu 10 accessing the Feedback Eliminator OR Sub Harmonic Synthesizer Menu, changes depndently form the selection
operated at the step 9:
If you select the “Feedback Elim” at point 9.
10.A. Input A/B Fbk
Feedback Eliminator
-> Fbk= On -> Fbk= On On Same as PM2
Off :
-> Number Notch Fix = 1 0 Same as PM2
: :
6 Same as PM2
-> Type Notch = Speech Speech Same as PM2
: :
Music high Same as PM2
-> Live Notch Lift = On On Same as PM2
Off :
-> Lift after = 5sec 5sec Same as PM2
: :
60min Same as PM2
-> [Enter] to clear Live PM2 N/A PM3 N/A
-> [Enter] to clear All PM2 N/A PM3 N/A