Need help?Do you have a question about the Phonic MAX 860 plus and is the answer not in the manual?
General| Total Harmonic Distortion (THD) | <0.03% |
|---|---|
| Signal-to-Noise Ratio | >100dB |
| Input Impedance | 20kΩ balanced, 10kΩ unbalanced |
| Connectors (Inputs) | XLR and 1/4" TRS |
| Connectors (Outputs) | Binding posts and speakON |
| Cooling | Variable speed fan |
| Channels | 2 |
| Frequency Response | 20Hz - 20kHz, +0/-1dB |
| Protection | Thermal, short circuit, DC, overload |
Contains warnings about electric shock, fire risks, and proper usage to prevent hazards.
Provides numbered instructions for safe operation, cleaning, installation, and maintenance.
Lists key features of the MAX Plus series power amplifiers, including power output and design aspects.
Guidance on initial setup and checks before operating the amplifier, like voltage and gain settings.
Details on rack-mounting the amplifier securely in a 19-inch rack and considerations for cooling.
Explains the auto-adjusting variable speed fan and the importance of unobstructed ventilation.
Details on connecting audio sources via XLR or 1/4" TRS jacks for balanced and unbalanced signals.
Information on speaker connections using binding posts and speakon connectors, including impedance.
Overview of front panel elements including power switch, LEDs, and gain controls.
Details on rear panel features like the Grounding/Floating switch and operation mode selection.
Explanation of Parallel, Stereo, and Bridge Mono modes for different audio configurations.
Details on protection against short circuit, thermal overload, DC offset, and RF interference.
Explanation of power on/off muting, subsonic filtering, and RF protection features.
Technical data on stereo and bridge mono output power, input sensitivity, and distortion.
Details on frequency response, input impedance, cooling, connectors, indicators, and weight.
To Next Page
