Need help?Do you have a question about the Phonic MAX Series and is the answer not in the manual?
General| Signal to Noise Ratio | >100 dB |
|---|---|
| Connectors Input | XLR and 1/4" TRS |
| Connectors Output | Binding posts and Speakon |
| Rack Units | 2U |
| Frequency Response | 20Hz - 20kHz (±0.5dB) |
| Input Impedance | 20 kOhms balanced, 10 kOhms unbalanced |
| Protection | Thermal, short circuit, overload, DC protection |
| Cooling | Fan-cooled |
Lists key features like power output, toroidal transformer, high pass filter, and connections.
Guides on rack mounting the amplifier, emphasizing space for cooling and weight distribution.
Explains the importance of proper airflow and avoiding obstructions for optimal cooling and performance.
Details balanced XLR and TRS 1/4" input jacks, supporting balanced and unbalanced signals.
Explains binding posts and speakon connectors for loudspeaker connection and impedance requirements.
Details front panel controls like power switch, gain knobs, and LEDs (Power, Signal, Peak).
Introduces Parallel, Stereo, and Bridge Mono modes for different audio setups.
Selectable filter at 30Hz or 50Hz to protect speakers and improve low-frequency performance.
Switch to engage or disengage the built-in limiter to prevent signal distortion and maintain dynamic range.
Options for circuit/chassis grounding and connecting point to resolve conflicts and share ground.
Details the power cord connection and the critical step of verifying AC voltage compatibility.
Explains various built-in protection circuits like short circuit, thermal, DC offset, muting, subsonic, and RF protection.
To Next Page
