INTRODUCTION
Thank you for purchasing a Max series power am-
plifier. Based on years of experience in designing
and manufacturing professional audio equipment,
we at PHONIC designed this power amplifier for
those who need an extremely powerful, reliable and
sturdy amplifier with a small footprint. Taking ad-
vantage of its huge heat sink as well as its variable
speed fan that auto-adjusts fan speed depending
on the temperature of the machine during opera-
tion, Max series power amplifier can only promise
to perform at its best. Its professional quality out-
put and its sturdy case design make this unit great
for various locations like churches, concert tours,
stages, disco, pubs, or any place that requires
amplifier installation.
This unit is designed with great care and great at-
tention to details, so please read this manual care-
fully. Look after it and keep it in a safe place for
future reference.
FEATURES
z Up to 1500 watt with only 2U footprint
z Output: 300W for Max 860, 450W for Max 1500
and 750W for Max 2500
z High current toroidal transformer allowing high
power output with low noise and low distortion
z Built in limiter with a button allowing user to dis-
able limiter’s function
z Selectable high pass filter at 30Hz or 50Hz for
reducing distortion and protecting speakers
z Balanced XLR-TRS combo input jack
z Binding post and speakon outputs
z Front mounted gain controls for easy access
z Signal and Peak LED indicators to monitor per-
formance
z Protection: short circuit, thermal, subsonic, RF
protection, output DC offset, power on/off muting
PHONIC CORPORATIONPage 4
INTRODUCTION / FEATURES / GETTING STARTED
MAX SERIES USER’ S MANUAL
GETTING STARTED
z Check the AC voltage before connecting the power
plug to the outlet. Make sure the AC power sup-
ply shares the same voltage used in your coun-
try (For example, while some countries use 100V,
others use 120V, 230V, or 240V). Proper
grounding prevents user from experiencing elec-
trical shock.
z Before turning on the power, make sure gains
are turned down to prevent other equipment from
harm.
z Check your cables regularly and label each end
clearly for easy identification.
z Always turn off the power before connecting to
and disconnecting from the unit.
z NEVER use solvents to clean the unit. Clean it
with a soft and damp or dry cloth.
To Next Page
Loading...
Need help?
General
