Need help?Do you have a question about the Phonic MAX 1000 and is the answer not in the manual?
General| Channels | 2 |
|---|---|
| Impedance | 4/8 Ohms |
| Frequency Response | 20Hz - 20kHz |
| Signal-to-Noise Ratio | >100dB |
| Output Power (Stereo) | 2 x 500W @ 4 Ohms |
| Output Power (Bridged) | 1000W @ 8 Ohms |
| Input Impedance | 20kΩ |
| Cooling | Fan-cooled |
| Protection | Thermal, short circuit, overload, DC protection |
| Connectors (Inputs) | XLR, 1/4" TRS |
| Connectors (Outputs) | Binding posts, Speakon |
Step-by-step safety instructions for operation, covering reading the manual and proper use.
Alerts for electrical shock, fire, rain, moisture, and radiation risks.
Background and general description of the MAX series power amplifier.
Highlights of the amplifier's capabilities and design, including power output and connectivity.
Instructions for mounting the unit in a standard 19-inch rack.
Crucial points to consider during setup, like voltage checks and gain control.
Initial steps for powering up and connecting the amplifier for basic operation.
Detailed description of the amplifier's components, including rear panel layout.
How to connect input signals using balanced XLR or 1/4" jacks.
Description of front panel buttons, LEDs, and gain controls for operation.
Explanation of rear panel switches, including operation mode selection.
How to use the amplifier in stereo configuration for independent channel operation.
How to use the amplifier in parallel configuration for mono signal through both channels.
Specific instructions for bridge mono operation to achieve maximum output power.
Explanation of built-in protection features like short circuit, thermal, and RF protection.
Guidance on power supply requirements, voltage, and grounding for safe operation.
How to connect speakers using binding posts, including wire gauge recommendations.
How to connect speakers using Speakon connectors for stereo, parallel, and bridge modes.
Solutions for problems with the unit not powering on or indicator lights.
Solutions for problems with no audio output, checking levels and connections.
Solutions for distorted audio, checking clip LEDs, and signal source.
Detailed performance and electrical data, including power output and frequency response.
Physical size and measurement details of the amplifier in mm/inches.
Information on obtaining replacement parts and contacting distributors for service.
Details on product warranty coverage, terms, and conditions.
How to get help, technical assistance, and find FAQs online.
To Next Page
