6. Setting up PFV
25 GigabitEthernet Interface Connected Manual
v Here is the easiest way:
1 ) Select [Auto detection].
2 ) Enter [IP-address] items 192.168.0.XXX.
3 ) Select [Auto] on the item [Packet size].
•
Refer to “7.1.3. Confirming and Setting Camera IP Address” in “Photron FASTCAM Viewer
User’s Manual” for the details of the [IP-address] dialog.
vi Click the [OK] button and close the [IP-address] dialog.
vii The settings become effective when the PFV is restarted.