about a second, the data will be saved automatically.
12. Download the data stored in analyzer. Open the "power/data
connection hermetic seal", connect the USB data connection and
instrument computer connections. Note that this operation must be
done in a safe area. The USB module must be purchased seperately, if
necessary, please contact us for more info.
13. Charge the unit by opening the "power/data connection hermetic
seal", on the power cord for instrument charging. Please connect the
supplied power adaptor to the charging port on the back end of the
analyzer. When the instrument is charging it will display the status on
screen. Note that the charging process must be in a safe area.
To Next Page
Loading...