8-12
LIFEPAK 15 Monitor/Defibrillator Operating Instructions
Transmitting Reports
Transmitting Reports
After you have established a wireless or direct connection, you can transmit Patient Records and
reports. All patient reports can be transmitted real time during patient monitoring (Manual or AED
mode), or reports can be transmitted post event (Archive mode).
How to Transmit a Current Patient Report
To transmit a current patient report:
How to Transmit an Archived Patient Report
When you turn off the LIFEPAK 15 monitor/defibrillator, the current Patient Record is saved in the
archives. For information about accessing Archive mode, see Chapter 7, "Data Management."
To transmit an archived patient report:
1. Press TRANSMIT. The Transmit menu
appears.
2. Use the
SPEED DIAL to select the desired
REPORT and SITE, if necessary.
3. Select
SEND. The patient report is
transmitted. The status of the transmission
appears in the message area.
Transmit
Send
Report
Site
Cancel...
Vital Signs
General Hosp
1. In the Options/Archives menu, select SEND
DATA
. The Options/Archives/Send Data
menu appears.
Options / Archives
Send Data...
Print...
Edit...
Delete...
To Next Page
Loading...
