ManualCU-1A/1B/2A/2BPage 8/32
Overview
Control unit CU-2A/B
A
D
C
B
Number Description
A Adjustable time for conveying
B Adjustable time for pipeline emptying
C Adjustable time for emptying of the conveyor
D Start/stop
The following function can be adjusted by the operator
Control unit CU-2A/B
Number Description
A Conveying time. Adjustable, 2–30 seconds
C Time for emptying of the conveyor. Adjustable, 2–30 seconds.
B Time for pipeline emptying for each conveying cycle. Adjustable 2–30 seconds
Control unit CU-2A
The bottom valve is open when the conveyor is turned off. If a level detector is used, the function of bottom
valve is closed when the level sensor is activated.
Control unit CU-2B
The bottom valve is closed when the conveyor is turned off.
To Next Page
Loading...