Exhaust assy. Removal
- Remove the 2 fixing nuts from the manifold to the
head
- Unscrew the 2 screws fixing the muffler to the
housing; then remove the whole muffler paying at-
tention to the interference between its supporting
bracket and the cooling cover.
Removal of the engine from the vehicle
- Remove the left side fairing
- Remove the helmet compartment door
- Remove the full muffler assembly.
- Remove the 3 rear brake transmission fixing
screws indicated in the photograph
- Remove the throttle control cable from the car-
burettor, indicated in the photograph
Engine from vehicle Fly 125 - 150 4T
ENG VE - 80
To Next Page