Pico Macom SIRD-FTA - Connecting to Second Receiver

3.5 Connecting to Second Receiver
Note: These instructions apply to a Receiver with SCART ports. lf you need
assistance in identifying your specific equipment configuration, contact your
authorized dealer.
Instructions:
1. Connect satellite input cable to Receiver’s “IF In.”
2. Connect cable from primary Receiver’s “TV SCART” to TV’s “SCART.”
3. Connect cable from primary Receiver’s “IF Out” to second Receiver’s
“LNB In.”
4. Connect cable from primary Receiver’s “VCR SCART” to second
Receiver’s “Video In.”
For safety reasons, keep equipment unplugged from power sources until all
cables are properly connected.
14
3.5 Connecting to Second Receiver
RECEIVER CONNECTIONS