3.7 Connecting to Digital Amplifier
Note: These instructions apply to a Receiver with both SCART and S/PDIF
ports. lf you need assistance in identifying your specific equipment configura-
tion, contact your authorized dealer.
Instructions:
1. Connect satellite input cable to Receiver’s “IF In.”
2. Connect cable from Receiver’s “TV SCART” to TV’s “SCART.”
3. Connect cable from Receiver’s “S/PDIF” to digital audio converter or
amplifier’s “S/PDIF.”
4. Connect cable from digital audio converter or amplifier’s “L” and “R” audio
to match speaker’s “L” and “R” audio.
For safety reasons, keep equipment unplugged from power sources until all
cables are properly connected.
16
3.7 Connecting to Digital Amplifier
RECEIVER CONNECTIONS
To Next Page
Loading...