4.2 Setting Radio Channels
Select <Radio channel> by using CH+/– in <Main Menu>. The result will be
the sub-menu as shown in the following figure.
The operation for radio channels is the same as TV channels. To switch
between TV and radio modes, press
TV/RADIO on the remote control.
Increase or decrease the volume by using VOL+/– either on the remote control
or on the Receiver’s front panel when watching TV or listening to the radio.
When watching a channel, the video from the current channel is frozen as
soon as
PAUSE is pressed. Press PAUSE again to continue watching.
MAIN MENU
4.2 Setting Radio Channels
23
To Next Page
Loading...