Pico Macom SIRD-FTA - Page 45

TROUBLESHOOTING
T
roubleshooting
45
PROBLEM WHA
T TO DO
POSSIBLE CAUSE
No picture appears
on the TV screen.
The system is con-
nected using RF
leads.
The remote control
is not working.
Change the batteries.
Batteries exhausted.
Aim the remote control
at the Receiver or
check that nothing
blocks the front panel.
Remote control is
incorrectly aimed.
There is interfer-
ence on your digital
satellite channels.
Change the
Receiver output
channel to a more
suitable channel, or
connect the system
using SCART leads.
The system is con-
nected using RF
leads and the output
channel of the
Receiver interferes
with an existing ter-
restrial channel or
video signal.
Check the UHF chan-
nel in your system and
tune the UHF channel
properly.