EasyManua.ls Logo

Pilotcar PC4 - LED Indicators and Troubleshooting

Default Icon
48 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
40
This manual contains important safety and operating instructions – read before
using charger.
Warning: Use charger only with an algorithm selected that is appropriate
to the specic battery type. Other usage may cause personal injury and
damage. Lead acid batteries may generate explosive hydrogen gas dur-
ing normal operation. Keep sparks, ames, and smoking materials away
from batteries. Provide adequate ventilation during charging. Never charge
a frozen battery. Study all battery manufacturers’ specic precautions, ie.
maximum charge rates and if cell caps should be removed while charging.
Danger: Risk of electric shock. Connect charger power cord to an outlet that has
been properly installed and grounded in accordance with all local codes and ordi-
nances. A grounded outlet is required to reduce risk of electric shock – do not use
ground adapters or modify plug. Do not touch uninsulated portion of output con-
nector or uninsulated battery terminals. Disconnect the AC supply before making
or breaking the connections to the battery. Do not open or disassemble charger.
Do not operate this charger if the AC supply cord is damaged or if the charger
has received a sharp blow, been dropped, or otherwise damaged in any way
refer all repair work to the manufacturer, or qualied personnel. This appliance
is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they
have been given supervision or instruction concerning use of the appliance by a
person responsible for their safety. Children should be supervised to ensure that
they do not play with the appliance.
Operating Instructions
CAUTION: Charger enclosure may be hot during charging. Use hand protection if handling the
charger while charging.
1. Extension cords must be 3-wire cord no longer than 30m(100’) at 10AWG or 7.5m
(25’ at 16AWG per UL guidelines.
2. Only connect ONE QuiQ charger to a single 15A circuit or the circuit may become overloaded.
3. Charger 10-LED Display:
4. Optional Charger Single-LED Display (internal or external)
CHARGER UNIT USER MANUAL
41
CHARGER UNIT USER MANUAL

Related product manuals