10 Programming the Hunter-Pro series with an LED keypad
3. Press the NEXT button twice to advance the ‘cursor’ to the 3
rd
parameter, ‘24 Hrs.
zone’.
12345678
9 10111213141516
RXN-416
Armed
Fault
'Cursor’ location: third parameter (left to right)
-- -++-+-
4. Press the pound key (#) to toggle the parameters value between ‘+’ and ‘-’, i.e.
disabled and enabled. As in the LCD keypad, the value is changed and the ‘cursor’
advances to the next parameter, the 4
th
in this example.
5. Press ENTR to save the data.
To Next Page
Loading...
