QUICK GUIDE
4
CICLI PINARELLO S.R.L. | Viale della Repubblica, 12 - 31020 Villorba (TV) - Italia
C.F. - R.I. - P.IVA IT 05994100963 | tel. +39 0422 42 08 77 | fax +39 0422 42 18 16 | www.pinarello.com
To activate the Walk-assistance mode:
· Set your system to “No Support“ mode on the Remote (See section
Setting the Support Level).
· Then, press and hold the down button on the Remote.
· After 2 s the Walk-assistance mode switches on.
You can set on the Remote to what extent should the eBike system support
you when pedalling.
The support level can be set at any time, even while riding.
To switch the support level, you must press the up/down buttons on the
Remote.
The following support levels are available:
2. SETTING THE SUPPORT LEVEL
Support Level Color Max. Support factor Max. Power
No Support White 0 % 0 W
Breeze Green 75 % 125 W
River Blue 150 % 250 W
Rocket
Pink 240 % 400 W
3. SWITCHING THE WALK-ASSISTANCE MODE ON/OFF
To Next Page
