QUICK GUIDE
6
CICLI PINARELLO S.R.L. | Viale della Repubblica, 12 - 31020 Villorba (TV) - Italia
C.F. - R.I. - P.IVA IT 05994100963 | tel. +39 0422 42 08 77 | fax +39 0422 42 18 16 | www.pinarello.com
The Battery Pack can be recharged at any time on its own, within a Drive
pack, or within your eBike.
Interrupting the charging process at any moment is also possible.
- Connect the power plug of the power cord to the power socket of the Charger.
- Then connect the mains plug to the mains supply.
- Finally, connect the charge connector into the charge plug of your Battery
Pack.
- Once the Battery Pack is fully charged, the LEDs at the charge-control
indicator turn off.
The state-of-charge can now be checked by briey pressing the on/off button
on your Battery Pack.
5. CHARGING THE BATTERY PACK
Action C
Action B
Charger 1
To Next Page
