18
DAB radio mode
DAB radio mode receives DAB/DAB+ digital radio and displays information
about the station, stream and track playing.
To enter DAB mode, either press SOURCE until the display shows DAB Radio or
select:
MENU > Main Menu > DAB
Scanning for stations
The first time you select DAB radio mode, or if the station list is empty,
Supersound 202 automatically performs a full scan to see what stations are
available. You may also need to start a scan manually to update the list of
stations for one of the following reasons:
Available stations change from time to time.
If reception was not good for the original scan (for example the antenna was
not up), this may result in an empty or incomplete list of available stations.
If you have poor reception of some stations (burbling), you may wish to list only
stations with good signal strength.
To start a scan manually, select MENU > Scan.
Once the scan is complete, the radio shows a list of available stations.
To remove stations that are listed but unavailable, select MENU > Prune
invalid
Select stations
To listen to or change a station, turn the SELECT control to view a list of stations
and press to select. Once selected, the station plays and the screen shows
information about the station, track or show as broadcast.
To Next Page
Loading...
